Illuminating Parts Of Microscope

Illuminating Parts Of Microscope

The illuminating parts of the microscope provide the light into the microscope. Which is NOT an illuminating part? *

Daftar Isi

1. The illuminating parts of the microscope provide the light into the microscope. Which is NOT an illuminating part? *


Answer: diaphragm

Explanation: i'm not sure, if i'm wrong sorry.


2. illuminating parts of the microscope


the illuminating parts of the microscope are the mirror and the iris diaphragm

3. microscope illuminating parts


Answer:

The condenser is placed below the

stage and concentrates the light, providing bright, uniform illumination in the region of the object under observation. Typically, the condenser focuses the image of the light source directly onto the plane of the specimen, a technique called critical illumination. Alternatively, the image of the source is focused onto the condenser, which is in turn focused onto the entrance pupil of the microscope objective, a system known as Köhler illumination

Answer:

Microscope illuminating parts

MIRROR

- located beneath the stage and has concave and plane surfaces to gather and direct light in other to illuminate the object.

ELECTRIC LAMP

- A built- in illuminator beneath the stage that may use if sunlight is not available.


4. give 3 parts of the microscope as illuminating


Answer:

1. Sub-stage condenser

2. Iris diaphragm

3. Light source

Explanation:

Hope it helps!

Correct me if im wrong (use the textbox)

:) if someone is correct make him / her brainliest :)

if im wrong its alright to brainliest the other person :)

I dont like to lie

Answer:

Mirror

Condenser

Diaphragm

Explanation:

Nasa module po namin yan

your welcome:D


5. Why illuminating parts of the microscope is important​


Answer:

Illumination is needed to give the various colors to minerals


6. which part of the compound microscope for illuminating ?​


Answer:

It consists of mainly three parts: Mechanical part - base, c-shaped arm and stage. Magnifying part - objective lens and ocular lens. Illuminating part - sub stage condenser, iris diaphragm, light source.

Explanation:


7. what are the illuminating parts of microscope


Answer:

it consists of a light source, such as an electric lamp or a light-emitting diode, and a lens system forming the condenser.


8. illuminating parts of microscope


Answer:

Eyepiece Lens

These are the lens located at the top of the microscope where you look through. These lens are can magnify small objects 10x to 15x.

Tube

This part connects the eyepiece lens to the objective lenses

Arm

This supports the tube and connects the tube to the base.

Base

This is the bottom part of the microscope which is used for support.

Illuminator

It is a steady light source which is used in place of a mirror. There are microscopes with mirrors that are used to reflect light from the external light source up to the bottom of the stage.

Stage

This is where you place the slides. The stage has clips to hold the slides in place.

Revolving Nosepiece | Turret

This is where objective lenses are held and rotats them to change power.

Objective Lenses

The microscope has 3 to 4 of these lenses which consists of 4x, 10x, 40x, and 100x powers. Couple it with the eyepiece lens and you can magnify the object with 40x, 100x, 400x, and 1000x more

Rack Stop

An adjustment that tells how close the objective lens can get to the slide.

Condenser Lens

Used to focus the light right to the specimen and are only useful at 400x and above.

Diaphragm | Iris

These have rotating disk under the stage. This part has different sized holed and is used to vary the intensity and size of the cone of light that is projected upward into the slide


9. what are the illuminating parts of microscope​


Answer:

Illuminating parts: Illuminating parts are a mirror and a condenser lens. The light beams from different sources are reflected back by the mirror into the condenser lens, which focuses the light onto the specimen.

M


10. whick of the following is an illuminating part of the microscope​


Answer:

Explanation:

mirror or condenser lens

Answer:

The illuminating parts of the microscope are mirror and condenser lens. The light beams from different sources are reflected back by the mirror into the condenser lens, which focuses the light onto the specimen. There is an iris diaphragm which regulates the illumination of the field of view.


11. which part is the classified as the illumining part of the microscope


Answer:

the condenser

the objectives

the eyepieces

Explanation:

hope it helps you a lot on your study=)

Answer:

condenser

Explanation:

In a modern microscope it consists of a light source, such as an electric lamp or a light-emitting diode, and a lens system forming the condenser. The condenser is placed below the stage and concentrates the light, providing bright, uniform illumination in the region of the object under observation.


12. what are the illuminating parts of the microscope


Illuminating Parts 

1. Mirror- reflects light 
2. Condenser- concentrates light 
3. Sub-stage Condenser- allows light to pass 
4. Iris Diaphragm- controls the passage of light

13. 3. Which are the illuminating parts of the microscope?​


Answer:

Illuminating Parts 

I1. Mirror- reflects light 

2. Condenser- concentrates light 

3. Sub-stage Condenser- allows light to pass 

4. Iris Diaphragm- controls the passage of light


14. what is the function of illuminating parts of the microscope​


Answer:

Illuminating parts are a mirror and a condenser lens. The light beams from different sources are reflected back by the mirror into the condenser lens, which focuses the light onto the specimen. There is an iris diaphragm which regulates the illumination of the field of view.

Explanation:

Pabrainliest


15. classify the parts of the microscope into illuminating or magnifying​


explain

Parts of a Microscope

Magnifying part - objective lens and ocular lens. Illuminating part - sub stage condenser, iris diaphragm, light source.

abswer;

The condenser is placed below the stage and concentrates the light, providing bright, uniform illumination in the region of the object under observation.

answer::

Typically, the condenser focuses the image of the light source directly onto the plane of the specimen, a technique called critical illumination.

They have an objective lens (which sits close to the object) and an eyepiece lens (which sits closer to your eye). Both of these contribute to the magnification of the object.


16. magnifying illuminating and mechanical parts of microscope


Answer:

Mechanical Parts

Draw tube - holds the eyepiece

Body Tube - passage way of light; holds draw tube and revolving nose piece

Coarse Adjustment Knob - for initial focusing; for raising and lowering the objectives

Fine Adjustment Knob - for final focusing

Arm - support the upper part and connects it ti the lower part

Dust shield - protects the objectives from dust as well as the specimen under study

Revolving nose piece - for switching the objectives

Mechanical screws - adjust the slide from left side to right side or from backward to forward

Stage clip - used to hold or support the glass slide and put specimen in place

Central hole - allows light to pass through directly to the specimen

Inclination joint - facilitate tilting

Pillar - connects upper part from the base.

Base - supports the entire microscope

Mirror rack - holds the mirror

Sub-stage - under the stage

Stage - platform where the slide is placed

Illuminating Parts

Mirror - provides light that reflects to the specimen

Abbe condenser - concentrates light

Magnifying Parts

Ocular/Eyepiece - the lens where one look/peep to magnify the specimen (magnification power: 10x or 15x)

Objectives - to magnify the specimen greatly.


17. Why illuminating parts of the microscope is important


microscope is an optical device that requires light the light is concentrated to small point parabola by concave lenses to magnify an object.

18. why is it important a illuminating parts of the microscope


Answer:

Dark imagess

Explanation:

As light enters the microscope, each lens absorbs some of the light. So by the time it reaches your eye the image is so dark. To counteract this, the specimen is illuminated.


19. Which are the illuminating parts of the microscope ​


Answer:

Parts of a Microscope

It consists of mainly three parts: Mechanical part - base, c-shaped arm and stage. Magnifying part - objective lens and ocular lens. Illuminating part - sub stage condenser, iris diaphragm, light source.


20. Which are the illuminating parts of the microscope? ​


Answer:

Illuminating parts: Illuminating parts are a mirror and a condenser lens. The light beams from different sources are reflected back by the mirror into the condenser lens, which focuses the light onto the specimen.


21. illuminating parts of microscope​


Answer:

mirror

diaphragm

electric lamp


22. illuminating parts of microscope?​


Answer:

• the condenser

•the objectives


23. name the illuminating parts of the microscope​


Answer:

In a modern microscope it consists of a light source, such as an electric lamp or a light-emitting diode, and a lens system forming the condenser. The condenser is placed below the stage and concentrates the light, providing bright, uniform illumination in the region of the object under observation.

Explanation:


24. what is the illuminator part of a microscope?​


Answer:

what is the illuminator part of a microscope?

= Draw Tube

Answer:

Illuminator is the light source for a microscope, typically located in the base of the microscope. Most light microscopes use low voltage, halogen bulbs with continuous variable lighting control located within the base. Condenser is used to collect and focus the light from the illuminator on to the specimen.

hope this help


25. The illuminating parts of the microscope provide the light into the microscope. Which of the following is NOT an illuminating part? a.condenser b.Draw tube c.iris diaphragm d.mirror THE ANSWER IS ''B'' DRAW TUBE IS NOT PART OF THE ILLUMINATING PART TY


The illuminating parts of the microscope provide light into the microscope. Which of the following is not an illuminating part?

> B. Draw tube


The Illuminating parts of a microscope are;

• Condenser

• Mirror/light/lamp

• Diaphragm/Iris diaphragm


#CarryOnLearning

26. why is important a illuminating parts of the microscope


Explanation:

Microscope is an optical device that requires light the light is concentrated to small point parabola by concave lenses to magnify an object


27. magnifying parts of Microscope Illuminating parts of MicroscopeMechanical parts ofMocroscope​


Answer:

1. They have an objective lens (which sits close to the object) and an eyepiece lens (which sits closer to your eye). Both of these contribute to the magnification of the object. The eyepiece lens usually magnifies 10x, and a typical objective lens magnifies 40x.

2. Illuminating parts are a mirror and a condenser lens. The light beams from different sources are reflected back by the mirror into the condenser lens, which focuses the light onto the specimen. There is an iris diaphragm which regulates the illumination of the field of view.

3. base, c-shaped arm and stage.


28. provides illumination to the specimen(parts of the microscope)


Answer:

coverslip

When viewing any slide with a microscope, a small square or circle of thin glass called a coverslip is placed over the specimen. It protects the microscope and prevents the slide from drying out when it's being examined.


29. The microscope has illuminating, magnifying, and mechanical parts. Which is a mechanical part of the microscope?


Answer:

1. They have an objective lens (which sits close to the object) and an eyepiece lens (which sits closer to your eye). Both of these contribute to the magnification of the object. The eyepiece lens usually magnifies partial* , and a typical objective lens magnifies - 0x

2. Illuminating parts are a mirror and a condenser lens. The light beams from different sources are reflected back by the mirror into the condenser lens, which focuses the light onto the specimen. There is an iris diaphragm which regulates the illumination of the field of view.

3. base, c-shaped arm and stage.

Answer:

Mechanical part - base, c-shaped arm and stage. Magnifying part - objective lens and ocular lens. Illuminating part - sub stage condenser, iris diaphragm, light source.

Explanation:

sana makatulong :)


30. magnifying illuminating and mechanical parts of microscope


Answer:

(A) Mechanical Parts of a Compound Microscope

Foot or base. It is a U-shaped structure and supports the entire weight of the compound microscope.

Pillar. It is a vertical projection. ...

Arm. The entire microscope is handled by a strong and curved structure known as the arm.

Stage. ...

Inclination joint. ...

Clips. ...

Diaphragm. ...

Nose piece.

Explanation:

Sana nakatulong


Video Terkait

Kategori science