if you remove the reflector from the flash light's body. describe the reflector ​

1. if you remove the reflector from the flash light's body. describe the reflector ​

Explanation:

a piece of glass, metal, or other material for reflecting light in a required direction, e.g., a red one on the back of a motor vehicle or bicycle.

a piece of glass, metal, or other material for reflecting light in a required direction, e.g., a red one on the back of a motor vehicle or bicycle.an object or device which reflects radio waves, seismic vibrations, sound, or other waves.

a piece of glass, metal, or other material for reflecting light in a required direction, e.g., a red one on the back of a motor vehicle or bicycle.an object or device which reflects radio waves, seismic vibrations, sound, or other waves.a reflecting telescope.

2. Explain the difference between a light producer and a light reflector​

Answer:

light producer has its own light and light reflector doesnt have it just gets light from the producer.

Explanation:

example the sun and moon. sun produces light. moon gets its light from the sun

3. Explain the difference between a light producer and a light reflector.​

Answer:

Light Producer Is Different Than Light Reflecthor

Why?

Explanation:

Its Because Of Light Producer Makes It Own Light From Energy Source Within Its Such A Nuclear Reactions,Chemical Reactions, Electrical Energy And Fire...They Should Be Explained That A Light Reflctor Does not produce they own light. But It reflects light From light resources.

4. D. Suggested Enrichment Reinforcement Activity/ies Directions: Answer the questions below. 1. Why are Light and Heat important? Cite 5 examples everyday activities where Heat and Light transformation useful. 1. 2 3. 4. 5.​

Answer:

1.because we need light and heat to get some energy.

2. we can use the light to see threw the dark.

3. we can use the heat for cooking.

4. heat can dry wet clothes

5. we can use light if there's an blackout so we can see each other.

Explanation:

brainliest me:)

5. what it is considered to be best reflector of light A. glass b.mirror c.river d. wax paper​

Answer:

B. mirror

kindlymarkmyanswerasBRAINLIEST!☆

Answer:

b. mirror

Explanation:

6. Light Reflector what do you notice​

Answer:

Since reflectors don't create light, their primary purpose is to fix shadows. If you are shooting a portrait outdoors during the day, a reflector can be used to fix odd shadows on the face, or even to prevent a backlit subject from becoming a silhouette.

Explanation:

yan po alam ko sana makatulong

7. True or false that the The most common elementary lighting fixture is the reflector?​

Answer:

true

Explanation:

A light fixture (US English), light fitting (UK English), or luminaire is an electrical device that contains an electric lamp that provides illumination. All light fixtures have a fixture body and one or more lamps. The lamps may be in sockets for easy replacement—or, in the case of some LED fixtures, hard-wired in place.

8. which of the following is an example of a light reflectorA. LightninB. Moon C. StarsD. Exploding fireworks​

ANSWER:B.Moon

Tama yan dahil niresearch ko din. :)

Godbless :)

Answer:

B. moon

based on my teacher it's moon and based on book

9. why is the moon classified as a light reflector instead of a light producer

Answer:

the moon doesn't produce its own light.

Explanation:

hope it helps you.

10. B. Identify the materials enumerated whether light sources or light reflectors. WriteLS if the material is a light source and LR if it is light reflector.1. Traffic light6. Candle2.Police bib7. Mirror3. Sun8. Flashlight4. Light bulb9. Lightning5. Traffic cones10. Cat's eyes​

1.LS
2.?
3.LS
4.LS
5.LR
6.LS
7.LR
8.LS
9.LS
10.Ls

11. INSTRUCTION: Write TRUE if the idea is correct and write FALSE if it is not. Write your answer on the blank. 1. Still water can be a good reflector of light, 2. Reflection is the bouncing back of light when it hits a smooth surface. 3. Irregular reflection happens when light hits a smooth surface. 4. Wood and bricks can be a good reflector of light. 5. Reflection occurs in a dark room,​

INSTRUCTION:Write TRUE if the idea is correct and write FALSE if it is not. Write your answer on the blank.

1. Still water can be a good reflector of light,

2. Reflection is the bouncing back of light when it hits a smooth surface.

3. Irregular reflection happens when light hits a smooth surface.

4. Wood and bricks can be a good reflector of light.

5. Reflection occurs in a dark room,

=======================Sagut:

1. True

2. True

3. True

4. False

5. True

____________________

Carry On Learning

@MissBrainlyUser

12. D. Suggested Enrichment/Reinforcement Activity/ies Directions: Answer the questions below. 1. Why are Light and Heat important? Cite 5 examples everyday activities where Heat and Light transformation useful. 1.____________________2.____________________3.____________________4.____________________ 5.____________________​

Explanation:

tama yang sagot ko pa Brainliest hope you have a great day weekend

13. D. Suggested Enrichment/Reinforcement Activity liesDirections: Answer the questions below.1. Why are Light and Heat important? Cite 5 examples everyday activities whereHeat and Light transformation useful.1.2.3.4.5.​

Answer:

1.chemical to heat transformation fire

sorry po yan lang ma answer ko wala

nang na Isip ko ehh

14. Enrichment Activity 2:Direction. Complete the diagramLesson. Mixing colors of light​

Answer:

pag hahaluin ba ung colors

15. light Reflectors1.Get a flashlight and switch it on.what do you observe about the beam it emits?​

ANSWER :

FLASHLIGHT HASNO BEAM, BUT EXACTLY THERE'S A LIGHTWEIGHT COLOUR IN FRONT OF FLASHLIGHT

16. 4.) Which of the following is an example of a light reflector?A.) fluorescent lightC.) concave mirrorB.) firefliesD.) campfire​

Answer:

C. Concave Mirror.

Explanation:

Concave mirror is example of light reflector.

[tex]\sf\\\gg AnswerForMore\\\gg AnswerForTrees\\\gg AnswerForFree[/tex]

QUESTION:

4.) Which of the following is an example of a light reflector?

CHOICES:

A. fluorescent light

C. concave mirror

B. fireflies

D. campfire​

ANSWER:

C. concave mirror

A concave mirror is an example of a light reflector.❤︎AlexaYumiLee❤︎

[tex]{\boxed{\boxed{\sf{{ Have \: a \: nice \: day!}}}}}[/tex]

17. 9. Good reflectors of radiant energy are poor_____of light.​

Answer:

emmiters

Explanation:

sana makatulong

18. D. Suggested Enrichment/Reinforcement Activity/iesDirections: Answer the questions below.1. Why are Light and Heat important? Cite 5 examples everyday activities whereheat and light transformation is useful.1.2.3.4.5​

Answer:

1.If there is no light its so dark im everywere

2.it will be so cold if no heat

3.heat can be so useful for cooking

Explanation:

ikaw na bahala sa iba

. yan lang kaya ko eh

19. explain the difference between a light producer and a light reflector​

Explanation:

A light fixture (US English), light fitting (UK English), or luminaire is an electrical device that contains an electric lamp that provides illumination. All light fixtures have a fixture body and one or more lamps.

Light producer makes its own light from energy sources within it such as nuclear reactions, chemical reactions, electrical energy, fire, etc. They should explain that a light reflector does not produce its own light, but reflects light from light sources.

20. What's MoreEnrichment Activity 1: "Light Reflectors"(Adapted from. Science and Technology Tedbook for Fourth Year, Reprint Edition)Materials: Flashlight (the one that can be dismantled). pen and ScienceActivity NotebookProcedure:emits?1. Get a flashlight and switch it on. What do you observe about the beam it2. Examine the part where the bulb is positioned01. What do you notice?3. Remove the reflector from the flashlight's body. Describe the reflectorNote The reflector is the silver-colored material that surrounds the bulb ofthe flashlight4. Remove the bulb and connect it to a source such that it can be moved oradjusted within the concave reflector See figure below:octorrefectocoDOSpo 2position5. Put the bulb in a position 1. Connect to the source and switch it on.Q2. What do you observe about the beam it emits?6. Repeat step 5 with the bulb at position 2 then 3.Q3. What are the differences of the beam intensities?​

Answer:

1.What do you observe about the beam it emits?

Answer:Light will come out and pass through the lens of a flashlight.

2.What do you notice?

Answer:I noticed that the bulb is positioned at the middle or the center of the reflector.Reflector bulbs contain a reflective coating and therefore provide directional light.

3.Describe the reflector.

Answer:A reflector is a plastic part,coated with a shiny aluminum layer that rests around the lamp (light bulb) and redirects the light rays from the lamp to allow a steady light beam,which is the light you see emitting from the flashlight.

4.Wala naman pong sasagutan dito.

5.What do you observe about the beam it emits?

Answer:The beam it emits is wider than the beam emitted before.It was repositioned.

6.What are the differences of the beam intensities?

Answer:During exposure a beam's strength is expressed as a function of the beam's quality and quantity in relation to a specific region.Both the nature of the beam and the volume of the beam have an impact on his strength.

7. Summarize your observations by writing: brightest, brighter, and bright for the be intensities in the table provided below.

Position of bulb in the reflector

1. Position 1

2. Position 2

3. Position 3

Beam intensities

_Brightest_

_Brighter_

_Bright_

8.Reassemble the flashlight that you dismantled after use.

How to Disassemble LED Flashlights

Put the newspaper down on a work surface.

Hold the back end of the LED flashlight with one hand.

Put the back half of the LED flashlight down on the newspaper.

Pull the LED assembly carefully from out of the front half of the LED flashlight.

Heat up the soldering iron.

21. A.Write True if the concept is correct and False if it is not.1.___Light bounces back in reflection.2.___Reflection occur in pitch dark rooms.3.___Regular reflection happens when you brush your teeth in front of the mirror.4.___Undisturbed water can be a goof reflectors of light.5.___Woods can be good reflectors of light.​

Answer:

1.true

2. false

3.true

4.true(not sure)

5.true

Explanation:

NOT sure in nomber 4

Pls brainliest me

Answer:

1.True

2.False

3.True

4.True

5.False

6.True

7.False

8.False (Light waves do not need a medium in which to travel )

9.True

10.False

_______

#Learnwithbrainly

#Carryonlearners

_______

22. what type of mirror used in flashlight or light reflectors?​

Answer:

CONCAVE mirror is used as torch reflector.

Explanation:

I hope its help if not correct me:)

#keepsafe

23. wood and bricks can be a good reflector of light.? true or false

[QUESTION & ANSWER]

wood and bricks can be a good reflector of light?

(True or False)

- False

HOPE IT HELPS ☺

✨ PRIMROWES ✨

Answer:

Flase because the Good thing for reflection is Glass,Water,Metal

24. 1. When you are riding a bicycle at night, your bicycle's reflectorshelp people in cars see your bicycle. How do bicycle reflectorswork?A. They are made of a special material that gives off its own light.B. They are hooked up to batteries that allow them to producelight.C. They are covered with paint that glows in the dark.D. They bounce light back from other sources.​

Answer:

D is the answer

Explanation:

hope it helps

25. What's More Enrichment Activity 1: "Light Reflectors” (Adapted from: Science and Technology Textbook for Fourth Year, Reprint Edition) Materials: Flashlight (the one that can be dismantled), pen and Science Activity Notebook Procedure: 1. Get a flashlight and switch it on. What do you observe about the beam it emits? 2. Examine the part where the bulb is positioned. Q1. What do you notice?

Answer:

1.Reprint Edition 2.Sciencei notice my answer in the correct bump says the truth in my answers

Explanation:

Pa Branliest po baka wrong

26. mirror shiny metals glass window are reflectors of light true or false​

Answer:

True

Explanation:

sna makatulong tnk po

Question:

mirror shiny metals glass window are reflectors of light, true or false?

Answer:✏TRUE

________________________________

✍0dett3

27. help ;-;Last one;• reflectors, _________and running lights​

Answer:

•Tires - to ensure that the tire are still intact to avoid slipping during operation.

• windows - to ensure that the windows are clear for proper vission of direction

during harvest.

• breaks - to ensure that the breaks are still in good condition for safety during operation

• reflections,

and running - FOR SAFETY PRECAUTIONS

lights

Explanation:

;w;""

28. How does the light reflector or a concave mirror illuminates light beam from a small source?

When parallel light rays hit a concave mirror they reflect inwards towards a focal point (F). ... Light rays travel towards the mirror in a straight line and are reflected inwards to meet at a point called the focal point.

#CarryOnLearning#Hope it helps!

29. Enrichment Activity 1: "Light Reflectors (Adapted from: Saence and Technology Textbook for Fourth Year, Reprint Edition) Materials: Flashlight (the one that can be dismantled), pen and Science Activity Notebook Procedure: . 1. Get a flashlight and switch it on. What do you observe about the beam it emits? 2. Examine the part where the bulb is positioned. Q1. What do you notice? 3. Remove the reflector from the flashlight's body. Describe the reflector. Note: The reflector is the silver-colored material that surrounds the bulb of the flashlight 4. Remove the bulb and connect it to a source such that it can be moved or adjusted within the concave reflector. See figure below: buto bulb bulb be neflector reflector reflector position 1 position 2 position 3 5. Put the bulb in a position 1. Connect to the source and switch it on. Q2. What do you observe about the beam it emits? 6. Repeat step 5 with the bulb at position 2 then 3. Q3. What are the differences of the beam intensities? 7. Summarize your observations by writing: brightest, brighter, and bright for the beam intensities in the table provided below. Position of Bulb in the Beam Intensities Reflector Position 1 Position 2 Position 3 8. Reassemble the flashlight that you dismantled after​

Answer:

1.What do you observe about the beam it emits?

Answer:Light will come out and pass through the lens of a flashlight.

2.What do you notice?

Answer:I noticed that the bulb is positioned at the middle or the center of the reflector.Reflector bulbs contain a reflective coating and therefore provide directional light.

3.Describe the reflector.

Answer:A reflector is a plastic part,coated with a shiny aluminum layer that rests around the lamp (light bulb) and redirects the light rays from the lamp to allow a steady light beam,which is the light you see emitting from the flashlight.

4.Wala naman pong sasagutan dito.

5.What do you observe about the beam it emits?

Answer:The beam it emits is wider than the beam emitted before.It was repositioned.

6.What are the differences of the beam intensities?

Answer:During exposure a beam's strength is expressed as a function of the beam's quality and quantity in relation to a specific region.Both the nature of the beam and the volume of the beam have an impact on his strength.

7. Summarize your observations by writing: brightest, brighter, and bright for the be intensities in the table provided below.

Position of bulb in the reflector

1. Position 1

2. Position 2

3. Position 3

Beam intensities

_Brightest_

_Brighter_

_Bright_

8.Reassemble the flashlight that you dismantled after use.

How to Disassemble LED Flashlights

Put the newspaper down on a work surface.

Hold the back end of the LED flashlight with one hand.

Put the back half of the LED flashlight down on the newspaper.

Pull the LED assembly carefully from out of the front half of the LED flashlight.

Heat up the soldering iron.

30. Which object is a good reflector of light?​

Answer:

The best surfaces for reflecting light are very smooth, such as a glass mirror or polished metal, although almost all surfaces will reflect light to some degree. Reflection of Light When light waves are incident on a smooth, flat surface, they reflect away from the surface at the same angle as they arrive.

Explanation:

Hope this helps.

CarryOnLearning

Answer:

mirror

Explanation:

base on my research you should brainleist me